Skip to main navigation Skip to main content Skip to page footer

UNIMAT 1 Classic

160141

Explore the wide range of CLASSIC accessories

Browse downloads for CLASSIC

Unimat 1 Classic

160141

For the model-making newcomer who wishes to turn and mill as well as for technical workshops in lower secondary level, the UNIMAT1 CLASSIC is ideal.

The CLASSIC contains all the components of the BASIC and much, much more.

With the two cross slides (30 mm travel), the longitudinal slide (30 mm travel), the 3-jaw chuck and other extensions additionally to the Unimat BASIC Set the following machines variants can be built:

  • stationary drilling machine
  • metal turning machine
  • horizontal or vertical mill

The included manual and the construction plan book provide all the necessary instructions and suggestions.

Thanks to the wide range of available accessories, an endless array of other machine tools can be constructed.

The Functions

Basic Functions Wood Working

Wood lathe, sander, jig saw, drill - all machine variants of the Unimat1 Basic set are also possible with Classic set.

Lathe

Longitudinal and cross slides with scaled hand-wheels allow for precise working. Designed like a professional lathe, UNIMAT 1 offers the possibility of manufacturing axles, rims, cannons, and other turning parts from soft and non-ferrous metals. Distance between centers 135 mm (optionally expandable), center height 25 mm.

Horizontal Mill

For architectural models, key and slot joints etc. The different collets from 1 to 6 mm clamping range promote a true run of the milling bit. Tilting the slides allows for milling at different angles.

Drill Press

Precise drillings at any angle. The machine offers traverse paths on the X-, Y- and Z-axis - three slides for three dimensional working. A technician‘s delight.

Machine variant Vertical Mill: Equipped with the included HSS end mill, the drill press turns into the vertical  milling machine. Any standard tool up to 6 mm can be used!

Technical Data

Motor 20.000 rpm, 12 V DC
Headstock M12x1, 8 mm hole through spindle
Gear ratio 1:5 (4000 rpm)
Slides (travels) 2 cross slides (30 mm), 1 long slide (40 mm), screw pitch 1 mm
Tailstock M12x1, 15 mm quill travel
3-Jaw-Chuck Clamping capacity 1.8-56 mm inside, 12-65 mm outside
Adaptor 110-240V/50-60Hz,12V DC, 2A

Contents Unimat1 Classic

160141

Machine beds (140 and 271 mm), 12 V motor, 12 V safety adaptor, headstock, tailstock, 2x cross slides, longitudinal slide, 3x intermediate pieces, metal-3 jaw chuck, jigsaw, rotating center, drilling table, woodturning support, 2x sanding disc with sanding paper, collets from 1 to 6 mm, cutting tool, drill, milling head, screwdriver, stabilizing plates and angle, material starter package, ...